FAQ’s When Buying a water softener

Absolute Water Ltd Surrey Water Softener Filtration System

As you know, hard water may cause a number of issues around the home. From a film on the shower doors and spots on glassware to plumbing issues and ultimately the damage to water-using appliances – there is no end of problems caused by hard water. And the only option to get rid of all these annoying issues is to install a water softener.

What is a Water Softener?

A water softener is a device that helps to eliminate magnesium and calcium ions from water. These ions make the water hard. A water softener replaces these mineral ions with sodium through the process of ion exchange. Most water softeners in Essex are equipped with the feature to indicate when the salt/sodium level gets low. This ensures that you can maintain required levels of soft water.

Water Softener Frequently Asked Questions

1. What is the grain capacity of a water softener?

The rated capacity of water softener may be defined as the maximum number of grains of hardness the softener can eliminate before regeneration.

2. How is water hardness calculated?

The hardness of water may be calculated in grains per gallon or gpg. One grain of water hardness equals to 1/7000 pound of rock. However, local municipal water supply usually calculates water hardness in liters, milligrams or parts per million (PPM). How does someone calculate the hardness of water? If you are a resident of a hard water area and use city water, you can call the council to check the hardness. You can also buy water hardness test kit for checking at home.

3. How does this figure impact the purchase of a water softener?

To decide on the proper size of water softener for a home, you need to multiply the number of people in the home by the amount of water they use every day. You can consider 80 gallons per person per day as an average. Now multiply that number by the grains of water hardness to calculate how many grains have to be eliminated per day. This will help you shop for the right water softener equipped to manage the load. Usually a four-person household is very likely to use a 33,000 grain unit.

4. What can be defined as regeneration?

Over the years, the hardness particles deposit on the resin bed inside the softener. As this takes place, the appliance goes into the regeneration cycle. As the cycle runs, the salt in the softener tank gets mixed with incoming stream to rid the resin bed of the hardness particles. Once the process of regeneration is done, the system becomes ready again to provide a steady supply of fresh, soft water.

5. What type of salt should be used?

A nugget-style or clean pellet salt is suggested. Other salts are also available but they are for special applications.

6. How much water is being used during the process of recharge?

The process requires as much water as needed to wash a load of laundry.

7. How much electricity is being consumed?

It requires the same amount needed to run a digital alarm clock.

These are the answers to some important questions to be considered while buying a water softener in Surrey and others area. In addition you should aware of the warning signs indicating that you need water softeners.

Recommended Posts