5 Signs you Really Need to Install a Water Softener

absolute water

When in the shower, do you feel that the water is affecting your body? Do you think your appliances are not performing the right way? Well, if the answer to both these questions is yes, getting a high-quality water softener installed in your residence can be extremely beneficial!

Hard water affects several areas of a home. The common symptoms of hard water presence vary from deposits left in the pipes, stains on your faucet and bathtub, itchy skin, inefficient appliances, etc. A good water softening system can help you avoid these problems and even enhance the life of your appliances, clothes, fixtures and plumbing.

Wondering how to determine if you are in need of a water softener? Read on to learn the top signs which indicate that you need to install a new water softener in Surrey!

Few Signs Indicating You Need High-Quality Water Softeners For Your Home

1. Itchy Dry Skin And Hair

Hard water has an excess amount of calcium and magnesium which can dry your skin and hair. Minerals present in the water settle on your soap, leaving a residue which irritates and makes your skin dry and rough. Hard water can even block pores and cause inflammation and blackheads. Since soaps, shampoo and moisturisers can prevent the itchiness and dryness to a certain extent only, it is always wise to use a water softener.

2. Clothes Look Faded

Washing your clothes and bed linen with hard water can make them gray, dull and rough. Due to the presence of extra minerals in the water, your clothes may feel scratchy after washing them. Bed sheets and clothes which are washed repeatedly with hard water can fade and become grey. While you may use a water softening detergent to reduce this effect, installing a good softening system is always recommended.

3. Visible Stains On Bathtub And Sinks

If you notice stains on your bathtub, faucets and sinks, consider it as a sign of hard water presence. These stains are formed when the tap water evaporates, leaving behind magnesium and calcium. Installing high-quality water softeners in Essex can be the most effective way to remove these stains and ensure the durability of your sinks, faucets and bathtub.

4. Frequent Plumbing Problems

Though the minerals left inside your pipes may not be much noticeable as compared to the hard water deposits on your faucets and clothes, the reality is that they are more damaging. Not only do the minerals lead to frequent breakdowns and more plumbing issues, but they even decrease the water pressure. To get rid of such frequent plumbing repairs, considering a water softening system can be a good solution.

5. Build-Ups On Your Appliances

Hard water can even lead to limescale build-up on your appliances like coffee pots, tea kettles, washing machines, etc. This prevents them from proper closing which leads to water leakage. This eventually reduces the longevity of these expensive appliances. Since frequent replacements and repairs can cost you a fortune, it definitely makes sense to use a water softener.

Have you noticed any of the signs above? Quickly find a reliable supplier and install a premium quality water softener! Also know why you should install a water softener in your home here.

FAQ’s When Buying a water softener

buying a water softener

As you know, hard water may cause a number of issues around the home. From a film on the shower doors and spots on glassware to plumbing issues and ultimately the damage to water-using appliances – there is no end of problems caused by hard water. And the only option to get rid of all these annoying issues is to install a water softener.

What is a Water Softener?

A water softener is a device that helps to eliminate magnesium and calcium ions from water. These ions make the water hard. A water softener replaces these mineral ions with sodium through the process of ion exchange. Most water softeners in Essex are equipped with the feature to indicate when the salt/sodium level gets low. This ensures that you can maintain required levels of soft water.

Water Softener Frequently Asked Questions

1. What is the grain capacity of a water softener?

The rated capacity of water softener may be defined as the maximum number of grains of hardness the softener can eliminate before regeneration.

2. How is water hardness calculated?

The hardness of water may be calculated in grains per gallon or gpg. One grain of water hardness equals to 1/7000 pound of rock. However, local municipal water supply usually calculates water hardness in liters, milligrams or parts per million (PPM). How does someone calculate the hardness of water? If you are a resident of a hard water area and use city water, you can call the council to check the hardness. You can also buy water hardness test kit for checking at home.

3. How does this figure impact the purchase of a water softener?

To decide on the proper size of water softener for a home, you need to multiply the number of people in the home by the amount of water they use every day. You can consider 80 gallons per person per day as an average. Now multiply that number by the grains of water hardness to calculate how many grains have to be eliminated per day. This will help you shop for the right water softener equipped to manage the load. Usually a four-person household is very likely to use a 33,000 grain unit.

4. What can be defined as regeneration?

Over the years, the hardness particles deposit on the resin bed inside the softener. As this takes place, the appliance goes into the regeneration cycle. As the cycle runs, the salt in the softener tank gets mixed with incoming stream to rid the resin bed of the hardness particles. Once the process of regeneration is done, the system becomes ready again to provide a steady supply of fresh, soft water.

5. What type of salt should be used?

A nugget-style or clean pellet salt is suggested. Other salts are also available but they are for special applications.

6. How much water is being used during the process of recharge?

The process requires as much water as needed to wash a load of laundry.

7. How much electricity is being consumed?

It requires the same amount needed to run a digital alarm clock.

These are the answers to some important questions to be considered while buying a water softener in Surrey and others area. In addition you should aware of the warning signs indicating that you need water softeners.

Installing Water Softeners? Here’re Your Tips For Easy Maintenance!

Installing Water Softeners

Now that you have picked the best water softener for your home, are you planning to get it installed by a qualified professional? Wondering about the ways to ensure that your system functions properly? Fret not. All you need to do is keep in mind two key elements for ensuring that the softening system functions properly!

When it comes to installing a water softening system, it’s important to judge the quality of installation and maintenance services offered by a company. Maintaining the smooth working condition of the system at frequent intervals is of utmost importance to ensure the durability of the system. Thus, you need to choose a service provider who can go the extra mile to help you maintain your system after installing it.

Wondering how to choose the best service provider? Read on!

Tips To Install Premium Quality Water Softeners

1. Ensure You Have The Right Toolkit

Before beginning with the installation of your new water softeners in Essex, you should make sure if the professional you are planning to work with, has all the necessary equipment and tools which are vital for the job. Some of the basic tools which he must have are a drilling machine, glue and clamps. This will make the drilling, joinery and fitting of the parts more precise.

2. Placement Of The System

The place where you decide to install your new water softener has great significance. This is because you need a room or a part of any room which will be vacant so that you can avoid all sorts of disturbance with the functioning of the water softener.

3. Abide By The Instruction Manual

In case you are planning to do the installation on your own, without taking any professional aid, ensure that you follow the instructions manual provide by your softening system’s manufacturer during the purchase. The instruction manual may even have support services which you may use for contacting the manufacturer if complications arise during the installation process.

3. Abide By The Instruction Manual

Tips To Maximise the Maintenance of Your Water Softener

1. Opt For Pure Salt

Although you can be tempted to use standard rock salt for maintaining your water softener since it is the least expensive option, it is always better to add pure salt with adequate iron remover. Standard rock salt may prove to be more costly in the long run and thus, it is always wise to opt for pure salt with efficient water softeners in West Sussex.

2. Ensure You Add The Right Amount

Even if your salt tank is still half empty, you should not add more salt to it. You must ensure that the salt amount in the tank is used up before you consider refilling it. Remember; you should not re-fill more than two-thirds of the tank.

3. Let Drain Line Positioning Be The Key

For preventing accidental sewage drain off into the system, ensure that the softener’s drain line is not pushed down. The end of the softener’s drain line should be above the drain for preventing the water softener’s malfunction.
So what are you still here for? Quickly choose a leading company and start availing great maintenance services!